MSFS ILS/LOC Problem Since Last Update

More
3 years 2 weeks ago - 3 years 1 week ago #17373 by SPA118

There seems to be very annoying problem of this plane failing to follow the ILS LOC and glide slope (even with the correct buttons pushed).  Sometimes it works and more often not.  This seems similar or related to the issue I've noted with the simulator recently for some of the default aircraft.  


 


I just noticed this after the last update.  Everything was fine prior and now the default Cessna Citation Longitude will no longer follow the ILS and glide slope.

Eric M. Eder, SPA118
Miami Hub Manager
This email address is being protected from spambots. You need JavaScript enabled to view it.
Proudly Serving Since September 2004
Last edit: 3 years 1 week ago by jer029.

Please Log in to join the conversation.

More
3 years 2 weeks ago #17374 by jer029
Argh, I've been following numerous threads that are likely related to this same problem, but mentioned as related to different aircraft or GPS systems. It appears to be related to certain or most stock aircraft or addons that use certain base logic of the simulator.

I know that the freeware addon Flybywire A320 Neo still functions correctly so it must not rely on the simulator's base code used for ILS/LOC tracking.

Hopefully this will be a significant bug mentioned enough around the forum to get the attention of the support folks and prompt an expedited fix on the next release.

John Rogers
Webmaster

Please Log in to join the conversation.

More
3 years 1 week ago - 3 years 1 week ago #17375 by jer029
I think I've managed to fix my ILS/LOC issues by doing some things suggested on various forum threads.  If anyone is still having problems with this let me know and I'll add a list of things to try that might correct the issue.  I've got to do some additional flight testing myself, or if you have a specific flight model and route for me to test, I can verify if it works on my system or not.

 

John Rogers
Webmaster
Last edit: 3 years 1 week ago by jer029.

Please Log in to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum