Best flight controls
4 years 9 months ago #15860
by SPA031
Best flight controls was created by SPA031
What are the best flight sim controls?
Click Here --> <a href="www.logitechg.com/en-us/products/flight/...dle.LOG-FLIGAMR.html">Logitech
edited by: SPA031, Apr 14, 2020 - 11:43 AM
Click Here --> <a href="www.logitechg.com/en-us/products/flight/...dle.LOG-FLIGAMR.html">Logitech
edited by: SPA031, Apr 14, 2020 - 11:43 AM
Please Log in to join the conversation.
4 years 9 months ago #15862
by KC135
Replied by KC135 on topic Best flight controls
I use the Thrustmaster 6000. I have the Saitek and Honeycomb but I like the joystick.
Please Log in to join the conversation.
4 years 9 months ago #15864
by SPA031
Replied by SPA031 on topic Best flight controls
I used to have the Thrustmaster 6000M but I must have worn it out. The signal must have gotten noisy because the aircraft controls would only go to the maximum or minimum setting no matter how delicate I was on the stick. I tried default settings and that did not fix it. I even tried reinstalling it's software. It used to work just fine with the same settings.
Please Log in to join the conversation.
4 years 9 months ago #15870
by bill721
Bill
Replied by bill721 on topic Best flight controls
I really like the Honeycomb yoke. I had a Chproducts yoke and rudder pedals. The honeycomb yoke is a lot better with smooth and accurate controls. <a href="flyhoneycomb.com/">flyhoneycomb.com/
The rudder pedals I have now are Thrust Master TPR, Again smooth and accurate. <a href="www.thrustmaster.com/en_US/products/tpr-...ster-pendular-rudder">www.thrustmaster.com/en_US/products/tpr-...ster-pendular-rudder
I need a new joystick for helicopter control. Any recommendations?
</a>
The rudder pedals I have now are Thrust Master TPR, Again smooth and accurate. <a href="www.thrustmaster.com/en_US/products/tpr-...ster-pendular-rudder">www.thrustmaster.com/en_US/products/tpr-...ster-pendular-rudder
I need a new joystick for helicopter control. Any recommendations?
</a>
Bill
Please Log in to join the conversation.
Time to create page: 0.059 seconds