-
Forum
-
Pilot's Lobby
-
Pilots' Pub
-
Another call for help...
Another call for help...
Less
More
-
Posts: 34
-
Thank you received: 0
-
-
4 years 3 months ago #16694
by paul.kennedy
After my SDD crashed I ended up getting a new one, and while I was at it, I got a Saitek Pro Flight Yoke, Saitek Rudder Pedals, Saitek Throttle Quadrant and a Saitek Switch Panel, the one with the Gear Lever and Ignition Switches on it. Have it all hooked up and the system recognises everything exceot the switch panel... So what do I do now? Apparently the drivers from Saitek don't help at all. Am using P3D V5. Any suggestions or tips from someone using this configuration would be deeply appreciated.
Please Log in to join the conversation.
Less
More
-
Posts: 569
-
Thank you received: 95
-
-
4 years 3 months ago #16695
by jer029
Hey Paul,
Try SpadNext:
www.spadnext.com/home.html
This works for me with P3dV4 to get the switch panel working, but it hadn't for FS2020 initially, but I haven't been back checking lately.
John
Please Log in to join the conversation.
Less
More
-
Posts: 103
-
Thank you received: 16
-
-
4 years 3 months ago #16696
by Westcoast
Sorry Paul, I don't have your configuration. I have the Saitek yoke, pedals and throttle quadrant, but I have a very elaborate VRInsight switch panel. I installed all of this stuff years ago and it's still working. The VR insight panel works with the stock/default compatible FSX aircraft, but requires special modules for advanced aircraft. I did that so long ago, that I really don't remember how I did it. If I every get organized, I'll probably find the manual.. Have you checked to see if there is a Saitek forum? Or maybe help from the manufacturer.
Please Log in to join the conversation.
Less
More
-
Posts: 34
-
Thank you received: 0
-
-
4 years 3 months ago #16697
by paul.kennedy
Thanks John I'll have a look at that in the morning...
Please Log in to join the conversation.
-
Forum
-
Pilot's Lobby
-
Pilots' Pub
-
Another call for help...
Time to create page: 0.061 seconds
